Multifunctional 3500 Lbs Forging Axle Drop Spindle Trailer Parts Accessories Atv Stub Axles with High Quality

Replacement #84 E-Z Lube spindle welds onto your 3,500-lb trailer axle. Works with L68149 inner bearing and L44649 outer bearing. Grease zerk makes greasing easy. Flange lets you attach a brake assembly.How to Mount a Trailer Axle SpindleSpindle is the center of a trailer axleThe center of a trailer......

Send Inquiry

Product Description

How to Mount a Trailer Axle Spindle Spindle is the center of a trailer axle The center of a trailer axle is called a spindle. It is the center of the axle that connects the trailer wheels to the vehicle. The wheel studs are located on the axle hub face. The distance between the tire centerlines is known as the axle track length. The distance between the centerline of the main axle tube and the spindle centerline is known as the axle drop. If the axle is straight, there is no drop. Trailer axles usually have front and rear bearings. The front bearing is closest to the road, while the rear bearing is closest to the trailer. Although these bearings are similar, they are not always the same size. For example, a tapered spindle will require a larger rear bearing than a straight spindle. A spindle is an integral part of a trailer, making it vital to the vehicle's handling and safety. It is a small circular part that is responsible for turning the wheels. Although spindles are small, they are so important that they are not directly connected to the wheel hub. A wheel hub is connected to the spindle using a castelated nut. It is used with 1 1/16" x 1 1/16" trailer wheel bearings Trailer wheels need care and maintenance just like vehicle wheels. Using a wheel bearing kit is a good way to restore the condition of your trailer's wheels. These kits contain the bearings, nuts, seals, and cotter pins. They also come with a dust cap to protect the bearings from dust. Trailer axles generally have a load capacity of 3,500 pounds. This kit is designed for this weight. Trailer axles typically have 13 or 14-inch tires. The axle's spindle is tapered so it fits most axle configurations. The DURA-ROLL TK-5 replacement wheel bearing kit comes with a grease cap and grease seal and meets or exceeds VESC standards. The kit also comes with instructions. It is welded to the frame rail of the trailer There are three basic ways to mount a trailer's axle. In the conventional method, the axle spindle is bolted to the ends of a long tubular axle. The axle itself is then suspended by springs. Another method uses a torsion beam that flexes to provide a smooth ride on uneven terrain. The axle is made of a solid or hollow tube. It has two ends, and mounting brackets are located near both ends. In addition, the axle has two integral circular flanges (also called spindles) that are welded to the frame rail of the trailer. These two pieces are connected by a welded connection. The welds are 1/4 to 3/8-inch wide. When the spindle becomes damaged, it can become difficult to repair in the field. Previously, the only option was to remove the entire axle and weld on a new one. This requires considerable downtime, and is also difficult to carry out in an off-road environment. As a result, a cost-effective alternative for the replacement of worn axle spindles is desirable. It can be mounted in two ways When choosing a new trailer axle, you need to consider its mounting method. There are two main methods: bolting the spindle to the axle, and using a torsion beam. While the first is easier, you will need the help of another person to make sure you have the correct measurement. Torsion axles use brackets that are inside or outside the trailer. These brackets are attached to the frame rail and span a short distance. This leaves the center of the trailer free and allows for lower ground clearance. The distance from the frame rail to the outside of the trailer is approximately the same. There are several types of axles, and the type of axle you select should match the dimensions of the trailer. You should measure the axle's axle load capacity to ensure it can support the maximum weight of your trailer. You can also determine the GVW by multiplying it by the number of axles. Also, you should take into account the track length of the axle, which is the distance between the center of the wheels and the hub face. The axle drop, on the other hand, measures from the axle centerline to the bottom of the main axle tube. If the axle is straight, the center bow should be up, and the center of the axle should be below the center of the hub.

For more models or customization, please click here!