EP-RV010 Made in China Superior Quality Aluminum Box Series Gearbox for Agricultural

Characteristic The 'W' transmission series is a good example of an Aluminum Box Series Gearbox. It has a die-casting aluminum housing, 2 taper roller bearings, and a full set of filler, level, and breather plugs. The main difference between the 'W' and the 'A' series is the d......

Send Inquiry

Product Description

Characteristic

The 'W' transmission series is a good example of an Aluminum Box Series Gearbox. It has a die-casting aluminum housing, 2 taper roller bearings, and a full set of filler, level, and breather plugs. The main difference between the 'W' and the 'A' series is the design of the die-casting die. A die-casting die is designed with the optimum amount of friction, heat, and stress relief, as well as a complete seal.
Featured in Toyota's 'W' transmission family
A family of RWD/4WD transmissions, the W series is built by Aisin and shared a bell housing to body bolt pattern. They are all 4-speeds and shared gear ratios. The W45 was a 4-speed variant of the W55 that was used in Toyota RWD cars from around 1980. While the case is aluminum, this transmission still uses the same mount. Several variations of the W55 were made.The W57 and W58 are based on the same basic design but have different gear ratios. The W57 and W58 have lower ratios, allowing them to accelerate faster even when their base ratios are similar. Both the W57 and W58 have the same base ratios but differ in the 5th gear. The W57 is often referred to as a close-ratio box, but that doesn't mean that it matches the W58's close-ratio characteristics.
Made with die-casting aluminium housing
Die-casting is an economical method to produce large quantities of aluminum components. Aside from its cost-effectiveness,die-casting also produces parts with complex 3D shapes. For this purpose, aluminum alloys are best suited. Many industries use die-casting to make heating plates because it is less costly and more convenient. This method can create custom-made parts that require no additional machining. Aside from being cost-effective, die-casting also produces high-quality parts that last for many years.
The quality of die-casting aluminum parts and housings is excellent. These parts can withstand high-pressure and temperature conditions, allowing them to withstand a variety of applications. They are also extremely lightweight. This makes them ideal for lightweight, outdoor applications. In addition, they are resistant to corrosion and environmental factors. This is the reason why many automobile manufacturers prefer this material for their parts. The benefits of die-casting aluminum are numerous.
Equipped with 2 taper roller bearings
Increasingly, equipment that is equipped with two taper roller bearings is being used. The difference between the two types of tapered bearings is the finished spacer width. Finished spacer width controls the mounted setting for the bearings. Depending on the application, the bearing may be mounted with either an axial or a radial force. This feature allows it to operate without a tight shaft fit.
The tapered roller bearings are unique from other types of bearing cages. Pin cages are the most common type. One ring is welded to the end of each roller, while the other ring has a series of pins around the circumference. The cage is usually polymer. Higher numbers of rollers mean a higher load capacity, but a greater number of rollers also reduces a bearing's capability under high speed, dynamic loads, and vibration.
Designed with a full set of filler, level and breather plugs
The "BOX" series worm gear units feature die-cast aluminium housing in sizes 25 to 90 and cast iron in sizes 110 and up. These units feature a two-row gearbox with 2RS autolubricated bearings on the output gear. The housings are designed with a full set of filler, level, and breather plugs for all mounting positions. In addition, they are equipped with special RS shields to facilitate easy mounting in positions V5 and VI without any extra interventions.

*Gears and shafts are quenched and have high surface hardness.

*Use high-quality oil seals and bearings.

*Each gearbox can be delivered after passing the inspection.

*The gearbox has low noise, and stable operation and is made of nodular cast iron with strong toughness and long service life.

ITEM	EP-RVO10
Ratio	1:1/1:1.35/1:1.9/3.3:1
Teeth	16/16 / 17/23 / 10/19 / 10/33
Module	4.5/3.5/4.5/2.5
Power(HP)	15/13/15/3
Rated Input	450rpm
Input/Output Description	1 3/8 Z6/Optic axis
Weight(N.W)	4Kg

We Also Supply PTO Shafts
If you also need the PTO axis, click here:https://planetary-gearboxes.en.Raydafon/productgrouplist-823550845/PTO_Drive_Shaft.html?spm=a2700.shop_pl.98.12

Agricultural Gearbox Production Workshop

Raydafon is a professional agricultural machine gearbox manufacturer.It produces more than 1,000 kinds of products and supports OEM and ODM. Including lawn mower series, rotary tiller series, rice harvester series, grain transportation storage series, etc. Has exported to numerous countries like America, Australia, India,Poland, etc. We work with many well-known brands like John Deere, Bush Hog, etc. Our annual production is 300,000 units, and our turnover in 2021 is USD 28 million. The export ratio is 80%, and the domestic market is 20%.

Hangzhou Raydafon Transmission Machinery Co., Ltd. was established in 2006. The company is located in Zhejiang Hangzhou, with 90 employees, an area of 3800 meters, and an annual output value of 40 million yuan. The company is committed to the R & D,manufacturing, and personnel training of various gearboxes, reducers, and construction machinery, including spiral bevel gearbox,spur gearbox, worm gearbox, and cylindrical gearbox. It also includes a variety of high-pressure cast valve body and shell products. Its products are used in various applications, such as agricultural mowers, snow sweepers, fertilizer applicators, grain conveyors, industrial equipment, oil mining machinery, marine industrial equipment, and engineering hydraulic components. More than 95% of its products are exported to Europe, the United States, and Australia. Asia and Canada. The company has strong technology and R & D capabilities, produces reliable and high-quality products, pursues a unique business philosophy and enjoys a high reputation in the manufacturing industry. Welcome to contact us by phone or email.

Click here for more details!

Please click on the photos below to visit their websites.

Q:What is the strength of your company?
A:We have a engineer team,who have well experienced on products and machine designs.We can help you to solve the problem you meet.

Q:How about you quality?
A:We have our own prcoessional factory and worker,so believe that our products have advange over our competitors.

Q:What is you MOQ?
A:Minimum order quality is 1 piece.

Q:Could you produce customized product according to your drawing or sample?
A:Yes.We have abundant experience in the production of non-standard products.

Packaging:
Chain+Plastic Bag+ Carton+Wooden case( If you have other requirements, we can customized according to customer requirements packaging. )

Shipping :
1.Most of the standard ones are in stock which we can send in 3-10 days after inspection and package.
2. Customized products delivery time should be determined according to the number.

Hot Tags: Ep-rv010 Made In China Superior Quality Aluminum Box Series Gearbox For Agricultural - Buy Agricultural,Aluminum Box Series Gearbox,Gearbox Product on Raydafon

Web Menu

Product Search

Language

Exit Menu

EP-RV010 Made in China Superior Quality Aluminum Box Series Gearbox for Agricultural